Skip to content

Canada site · www.airlesspaintsprayer.ca · CAD

In the USA? www.airlesspaintsprayerusa.com →

Region and language CAD
Region and language

Country/region and currency

0 items in cart

Cart

Your cart is empty.

Airless safety: the one injury to know about

· Airless Sprayer

Close-up of the HVBAN A3 pump and pressure control

An airless sprayer works at thousands of psi. That is what makes it fast, and it is why the rules below are not optional.

Injection injury

A jet of paint at spray pressure can pierce skin. It can look like a small cut or nothing at all, but paint has been pushed under the skin and into the tissue. It is a medical emergency. Go to an emergency room straight away, tell them it is a high-pressure injection injury, and say which coating it was. Do not wait for it to hurt.

Rules that prevent it

  • Never point the gun at anyone or any part of your body.
  • Keep the tip guard on. Never put a hand or finger over the tip.
  • Lock the trigger whenever you stop spraying.
  • Relieve pressure before cleaning, changing a tip or checking a leak.
  • Never try to stop a leak with your hand or a rag. Relieve pressure first.
  • Check hoses for wear before each job; replace a damaged hose, do not tape it.

Everything else

  • Wear a respirator suited to the coating, eye protection and gloves.
  • Ventilate indoors. With solvent coatings, remove ignition sources and ground the equipment as the manual says.
  • Keep children and pets away while spraying and until the work area is clear.

Your machine's approved manual has the full safety section; read it before the first job.