Which sprayer is right for me?
· Airless Sprayer
You do not need to know every specification to start. Answer four questions in your head, then read the one section that fits. If two fit, compare the two models side by side or ask us.
Four questions
- Paid work or your own place? Contractors and property-maintenance crews spray more often, with more coatings, and need parts and service planned. Homeowners spray a few times a year and need setup, masking and cleanup to feel doable.
- What will you spray first? Walls and ceilings, a fence or deck, exterior siding and trim, furniture and cabinets, or a mix.
- What coating? Latex and acrylic paints, primers, stains and sealers behave differently. The coating maker's data sheet names a recommended tip size; match it to the machine's published maximum tip.
- How often? One project, a few projects a year, monthly, or weekly. Frequency decides how much the kit, wear parts and service route matter.
If it is paid work, start with the EP270
Published maximum flow 2.7 L/min, maximum tip 0.025 in, 23 MPa. Choose it if you repaint interiors and exteriors week after week with one gun and standard latex, and you want the kit, spare parts and service route sorted before the first job. Confirm the circuit and plug for your region and the hose length in the kit. See the EP270.
Talk to us first if you run two guns, spray elastomerics or block filler, or need higher output: those jobs need a larger machine than the launch range.
If it is renovations, rentals or a serious home, start with the A3
Published maximum flow 2.3 L/min, maximum tip 0.023 in, 23 MPa, brushless motor. The factory reports it as its best-selling model. Choose it for whole-room repaints, rental turnovers, fences, sheds and exterior trim, and for a small painting business that does not yet need the EP range. See the A3.
Choose the LF19 instead if your projects are occasional and smaller. Choose the EP270 instead if spraying is your weekly work.
If it is a few home projects a year, start with the LF19
The most compact of the three, with hopper and suction-tube feed options. Published maximum flow 1.9 L/min, maximum tip 0.019 in, 19 MPa. Choose it for a fence, a deck, a shed, a room or two a year, and furniture with the right fine-finish tip. See the LF19.
A roller may be the better tool if your project is a single small touch-up. Masking and cleanup take longer than the spraying.
Before you buy any of them
- Match the coating's recommended tip to the machine's published maximum tip.
- Confirm the Canadian or US electrical version, plug and documentation for the exact model.
- Confirm the complete kit: gun, hose length, tip, filters, manual.
- Read the delivery, returns and warranty terms once they are published; until then they read as draft on every product page.
Still not sure?
Send a project enquiry with the surface, the coating and how often you expect to spray. We will tell you which model to look at, and when a roller or a rental is the better answer.
Photo: illustrative scene, not a customer photograph.