Renovation and property work
A3HVBAN A3 Electric Airless Paint Sprayer
For the projects between home and work.
Electric airless with a published 2.3 L/min maximum flow and a 0.023 in maximum tip, offered in cart and hopper configurations.
- Maximum flow
- 2.3 L/min
- Maximum tip
- 0.023 in
- Pressure
- 23 MPa / 3,336 psi
Your market: Canada · CAD
$869.00
Plus flat $49 shipping anywhere in Canada or the USA. Taxes shown at checkout.
Before you decide
- Delivery
- Flat $49 anywhere in Canada or the USA. Delivery times being confirmed.
- Returns
- Draft terms, awaiting approval
- Warranty
- Draft terms, awaiting approval
- Ask a person
- Send your coating, surface and project size
Description
A compact electric airless platform for residential painting projects.
Manufacturer catalog: maximum flow 2.3 L/min; maximum tip 0.023 in. The factory identifies A3 as its global best-selling model.
HVBAN A3
Side by side
Next to the Graco 390 PC.
| Compared item | HVBAN A3 | Graco 390 PC |
|---|---|---|
| Listed price | $869.00 | $1,659.00The Paint People (out of stock when checked) |
| Shipping | Flat $49, anywhere in Canada or the USA | Set by each dealer |
| Maximum flow | 2.3 L/min | 1.8 L/min (0.47 gpm) |
| Maximum tip | 0.023 in | 0.021 in |
| Pressure | 23 MPa / 3,336 psi | 22.8 MPa / 3,300 psi |
| How you buy | Direct from us, price on the page | Through dealers and retailers |
| Warranty and service | Terms being written; shown in full before orders open | Published warranty and a service-centre network |
Graco 390 PC price: The Paint People (out of stock when checked), checked 19 to 20 November 2026. See Graco’s published figures
Questions buyers ask about the A3
The questions contractors and homeowners ask before buying an airless sprayer, answered as far as we can today. Where the answer depends on the manufacturer, it says so.
On the job
Does the warranty cover commercial and crew use?
Being confirmed with HVBAN
The warranty is being written now. It will say in plain words whether paid and crew use are covered, which wear parts (packings, tips, filters) are excluded, who pays freight on a claim and how long you are without the machine. Orders do not open until it is published.
If it breaks mid-job, how fast can I get parts?
Being confirmed with HVBAN
We are building a parts list for the A3 with part numbers, prices and North American stock. There is no repair-centre network yet, and we will not pretend there is. Until the list is published, ask us about any part before you buy.
Can it spray elastomeric, block filler or stain?
Answered
Match the coating’s data-sheet tip to the machine. The A3 publishes a maximum tip of 0.023 in. Elastomerics and block fillers usually call for 0.025 to 0.035 in tips, so plan them only within that limit. Semi-transparent stains and most latex primers and paints sit well inside it. An approved coating guide for the regional model will follow.
Will it run on a 15 A job-site circuit or a generator?
Being confirmed with HVBAN
We are confirming the North American nameplate amps for the A3 and will publish the circuit and the minimum generator size. In general: use a dedicated 15 A circuit and a 12-gauge cord no longer than the manual allows, and do not share the circuit with other tools.
How many gallons a week or a year is it built for?
Being confirmed with HVBAN
The big brands rate machines by gallons per week or per year. We have asked HVBAN for the A3’s rating and will publish it here. Until then, the published maximum flow is the best guide to its class.
Do my Graco or Titan tips and guards fit?
Being confirmed with HVBAN
Not confirmed yet. Thread and guard compatibility with Graco and Titan tips is on our list for the manufacturer. Until it is confirmed, plan on HVBAN tips and guards.
Is it certified for job sites in Canada and the USA?
Being confirmed with HVBAN
North American electrical certification (such as cETL, cUL or CSA) is being confirmed for the regional model. The mark and the certificate will be shown on this page. A CE mark alone is not enough here.
How long is the end-of-day flush?
Answered
Plan on about 30 minutes for a thorough flush: water for latex, or the solvent the coating names. Never leave coating in the pump overnight, clean the inlet strainer and gun filter, and carry spare filters and a spare tip. The getting-started guide walks through it.
At home
Should I spray or roll?
Answered
Spray when the space is empty or outdoors: fences, decks, sheds, siding, ceilings and whole empty rooms. Roll a single furnished room or a touch-up, where masking and cleanup would take longer than spraying saves. Tell us the project and we will say if a roller is the better answer.
Will my paint spray without thinning?
Being confirmed with HVBAN
Read the “Application” section on the can: it names a tip size and whether to thin. Thicker paints often need a larger tip rather than thinning, up to the A3’s published 0.023 in. A coating guide for the regional model is being confirmed.
How much masking and overspray should I expect?
Answered
Airless spraying makes a fine mist, and no sprayer removes it entirely. Mask and cover everything nearby, move the car, spray outdoors only when it is calm, and use the lowest pressure that gives a pattern without heavy edges. That one habit cuts overspray more than anything else.
How long does cleanup take?
Answered
Expect 20 to 30 minutes: relieve the pressure, flush with water for latex until it runs clear, then clean the tip, guard and filters. It is the step people underestimate. Plan for it and the sprayer stays reliable.
Should I buy or rent?
Answered
Renting an airless sprayer costs about US$70 to US$106 a day at US hardware chains, plus tips and filters. For one weekend, rent. If you will paint a fence, a deck and a few rooms over the next couple of years, owning the A3 usually costs less, and it is ready when you are.
Is it dangerous?
Answered
It is safe used as the manual says, but the pressure is high. Never point the gun at anyone, keep the tip guard on, lock the trigger when you stop, and never touch a leak. A spray injection can look like a small cut but is a medical emergency: go to an emergency room and say it is an injection injury.
How do I store it over a Canadian winter?
Answered
Flush it clean, leave pump-protector fluid in the pump as the manual directs, and store it indoors above freezing. Water left in the pump can freeze and crack parts, and valves left dirty can seize over months.
Can I plug it into a normal household outlet?
Answered
Yes. The A3 sold here is the North American version: 120 V with a standard plug. Use a dedicated circuit where you can, and do not run it on a long, thin extension cord.
Answers marked “Being confirmed” are updated before orders open. Nothing here is a warranty or certification claim. Read the guides · Ask a person
Why the A3
The A3 sits between the home-project models and the EP contractor range on published flow and tip size. That is why it is proposed as the crossover for renovations and property maintenance.
Its published figures let you compare it against the LF19 for occasional projects and the EP270 for recurring paid work.
Before choosing, confirm your coating and the complete kit. A suitability conversation is more useful than choosing by maximum pressure alone.
Good fit to explore
- Interior walls and ceilings
- Rental turnovers and repeat repainting
- Fences, sheds and exterior trim
- Smaller painting businesses and property maintenance
Confirm before you buy
- Match the coating’s recommended tip to the 0.023 in maximum
- Use a dedicated circuit and a heavy-gauge extension cord
- Confirm the hose length, gun and tip included in the kit
- Allow time for masking, a practice pass and cleanup
The complete setup
Pictures help you explore. A written packing list defines the actual offer.
Included in this configuration
- Machine, gun, hose and tip: exact items to be confirmed with the regional packing list
Optional accessories
- Additional tips and guards
- Longer hose
- Spare filters and seals
What you will need separately
- Paint or stain, with the manufacturer’s data sheet
- Masking film, tape and drop sheets
- Respirator, eye protection and gloves
See it in use
The working details
| Maximum flow | 2.3 L/min |
|---|---|
| Maximum tip | 0.023 in |
| Pressure | 23 MPa / 3,336 psi |
| Motor and power | Brushless DC, 1,300 W |
| Power supply | 120 V, 60 Hz, North American plug |
| Regional electrical version | Supplied for Canada and the USA with a North American plug |
| Weight | To be confirmed |
| Configurations | Cart or hopper configurations; regional availability to be confirmed |
Source: manufacturer product page, checked 19 November 2026. View the manufacturer page
The price is the beginning of the calculation.
Include your project frequency, preparation, cleanup, wear parts and service arrangements.
What you pay
Request one regional quote with the machine, exact kit, delivery, tax and any duties itemized.
What you maintain
Know the cleaning requirements and the correct filters, seals, tips and wear parts for the model.
Who helps
Confirm the written warranty, return terms, service location and freight responsibilities before ordering.
Support for this model
Compare the alternatives
Compare the role, the published figures and the kit. Similar maximum flow does not establish identical durability, finish or support.
| Model | Proposed role | Maximum flow | Maximum tip | Pressure | Motor and power |
|---|---|---|---|---|---|
| HVBAN A3 | Renovation and property work | 2.3 L/min | 0.023 in | 23 MPa / 3,336 psi | Brushless DC, 1,300 W |
| HVBAN LF19 | Home projects | 1.9 L/min | 0.019 in (product page) | 19 MPa / 2,756 psi | Brushless DC, 800 W |
| HVBAN EP270 | Professional painting | 2.7 L/min | 0.025 in | 23 MPa / 3,336 psi | Brushless DC, 1,500 W (product page) |
Real owner experience
Our first project stories belong here.
We will publish real customer experiences with permission. No invented ratings or testimonials.
Questions about the A3
Can I order the A3 now?
Not yet. The price is set and shown on this page; orders open once the North American configuration and the warranty and returns terms are confirmed. Request a written quote now and we will confirm your kit and order date.
Which paints and coatings can it spray?
Start from the coating manufacturer’s recommended tip size and compare it with the machine’s published maximum tip. We will publish an approved coating guide for each regional model before sale.
Is it right for a first-time sprayer?
An airless sprayer rewards preparation: masking, a practice pass on cardboard and a proper cleanup. If your project is a single small touch-up, a roller may be the better tool. Tell us the project and we will say so.
What about voltage in Canada and the United States?
This is the North American version: 120 V, 60 Hz, with a standard North American plug.




