Professional painting
EP270HVBAN EP270 Electric Airless Paint Sprayer
A clear starting point for recurring painting work.
A factory-nominated contractor model with a published 2.7 L/min maximum flow and a 0.025 in maximum tip, for recurring small and medium painting jobs.
- Maximum flow
- 2.7 L/min
- Maximum tip
- 0.025 in
- Pressure
- 23 MPa / 3,336 psi
Your market: Canada · CAD
$1,599.00
Plus flat $49 shipping anywhere in Canada or the USA. Taxes shown at checkout.
Before you decide
- Delivery
- Flat $49 anywhere in Canada or the USA. Delivery times being confirmed.
- Returns
- Draft terms, awaiting approval
- Warranty
- Draft terms, awaiting approval
- Ask a person
- Send your coating, surface and project size
Description
An electric airless platform in the factory’s recommended contractor range.
Manufacturer catalog: maximum flow 2.7 L/min; maximum tip 0.025 in.
HVBAN EP270
Side by side
Next to the Graco Ultra 490 XT.
| Compared item | HVBAN EP270 | Graco Ultra 490 XT |
|---|---|---|
| Listed price | $1,599.00 | $3,228.00The Paint People |
| Shipping | Flat $49, anywhere in Canada or the USA | Set by each dealer |
| Maximum flow | 2.7 L/min | 2.6 L/min (0.7 gpm) |
| Maximum tip | 0.025 in | 0.025 in |
| Pressure | 23 MPa / 3,336 psi | 22.8 MPa / 3,300 psi |
| How you buy | Direct from us, price on the page | Through dealers and retailers |
| Warranty and service | Terms being written; shown in full before orders open | Published warranty and a service-centre network |
Graco Ultra 490 XT price: The Paint People, checked 19 to 20 November 2026. See Graco’s published figures
Questions buyers ask about the EP270
The questions contractors and homeowners ask before buying an airless sprayer, answered as far as we can today. Where the answer depends on the manufacturer, it says so.
On the job
Does the warranty cover commercial and crew use?
Being confirmed with HVBAN
The warranty is being written now. It will say in plain words whether paid and crew use are covered, which wear parts (packings, tips, filters) are excluded, who pays freight on a claim and how long you are without the machine. Orders do not open until it is published.
If it breaks mid-job, how fast can I get parts?
Being confirmed with HVBAN
We are building a parts list for the EP270 with part numbers, prices and North American stock. There is no repair-centre network yet, and we will not pretend there is. Until the list is published, ask us about any part before you buy.
Can it spray elastomeric, block filler or stain?
Answered
Match the coating’s data-sheet tip to the machine. The EP270 publishes a maximum tip of 0.025 in. Elastomerics and block fillers usually call for 0.025 to 0.035 in tips, so plan them only within that limit. Semi-transparent stains and most latex primers and paints sit well inside it. An approved coating guide for the regional model will follow.
Will it run on a 15 A job-site circuit or a generator?
Being confirmed with HVBAN
We are confirming the North American nameplate amps for the EP270 and will publish the circuit and the minimum generator size. In general: use a dedicated 15 A circuit and a 12-gauge cord no longer than the manual allows, and do not share the circuit with other tools.
How many gallons a week or a year is it built for?
Being confirmed with HVBAN
The big brands rate machines by gallons per week or per year. We have asked HVBAN for the EP270’s rating and will publish it here. Until then, the published maximum flow is the best guide to its class.
Do my Graco or Titan tips and guards fit?
Being confirmed with HVBAN
Not confirmed yet. Thread and guard compatibility with Graco and Titan tips is on our list for the manufacturer. Until it is confirmed, plan on HVBAN tips and guards.
Is it certified for job sites in Canada and the USA?
Being confirmed with HVBAN
North American electrical certification (such as cETL, cUL or CSA) is being confirmed for the regional model. The mark and the certificate will be shown on this page. A CE mark alone is not enough here.
How long is the end-of-day flush?
Answered
Plan on about 30 minutes for a thorough flush: water for latex, or the solvent the coating names. Never leave coating in the pump overnight, clean the inlet strainer and gun filter, and carry spare filters and a spare tip. The getting-started guide walks through it.
At home
Should I spray or roll?
Answered
Spray when the space is empty or outdoors: fences, decks, sheds, siding, ceilings and whole empty rooms. Roll a single furnished room or a touch-up, where masking and cleanup would take longer than spraying saves. Tell us the project and we will say if a roller is the better answer.
Will my paint spray without thinning?
Being confirmed with HVBAN
Read the “Application” section on the can: it names a tip size and whether to thin. Thicker paints often need a larger tip rather than thinning, up to the EP270’s published 0.025 in. A coating guide for the regional model is being confirmed.
How much masking and overspray should I expect?
Answered
Airless spraying makes a fine mist, and no sprayer removes it entirely. Mask and cover everything nearby, move the car, spray outdoors only when it is calm, and use the lowest pressure that gives a pattern without heavy edges. That one habit cuts overspray more than anything else.
How long does cleanup take?
Answered
Expect 20 to 30 minutes: relieve the pressure, flush with water for latex until it runs clear, then clean the tip, guard and filters. It is the step people underestimate. Plan for it and the sprayer stays reliable.
Should I buy or rent?
Answered
Renting an airless sprayer costs about US$70 to US$106 a day at US hardware chains, plus tips and filters. For one weekend, rent. If you will paint a fence, a deck and a few rooms over the next couple of years, owning the EP270 usually costs less, and it is ready when you are.
Is it dangerous?
Answered
It is safe used as the manual says, but the pressure is high. Never point the gun at anyone, keep the tip guard on, lock the trigger when you stop, and never touch a leak. A spray injection can look like a small cut but is a medical emergency: go to an emergency room and say it is an injection injury.
How do I store it over a Canadian winter?
Answered
Flush it clean, leave pump-protector fluid in the pump as the manual directs, and store it indoors above freezing. Water left in the pump can freeze and crack parts, and valves left dirty can seize over months.
Can I plug it into a normal household outlet?
Answered
Yes. The EP270 sold here is the North American version: 120 V with a standard plug. Use a dedicated circuit where you can, and do not run it on a long, thin extension cord.
Answers marked “Being confirmed” are updated before orders open. Nothing here is a warranty or certification claim. Read the guides · Ask a person
Why the EP270
The EP270 is the middle of the factory’s proposed contractor range (EP230, EP270, EP310) on published flow and tip size.
Compare its output, included kit and service requirements against the A3 for lighter work and the EP310 for higher output.
Confirm the coating and the complete kit before choosing.
Good fit to explore
- Recurring small and medium repaint jobs
- Apartment and rental turnovers
- Interior and exterior latex work with one gun
Confirm before you buy
- Match your usual coatings and tips to the 0.025 in maximum
- Check the circuit you will run it on; see the motor note in the specifications
- Confirm hose length, gun and spare parts availability
- Ask about duty and service before a fleet purchase
The complete setup
Pictures help you explore. A written packing list defines the actual offer.
Included in this configuration
- Machine, gun, hose and tip: exact items to be confirmed with the regional packing list
Optional accessories
- Additional tips and guards
- Longer hose
- Spare filters, seals and a repacking kit
What you will need separately
- Coatings and their technical data sheets
- Masking and site protection
- Respirator, eye protection and gloves
See it in use
The working details
| Maximum flow | 2.7 L/min |
|---|---|
| Maximum tip | 0.025 in |
| Pressure | 23 MPa / 3,336 psi |
| Motor and power | Brushless DC, 1,500 W (product page) |
| Power supply | 120 V, 60 Hz, North American plug |
| Regional electrical version | Supplied for Canada and the USA with a North American plug |
| Weight | To be confirmed |
| Configurations | Stand, high cart and hopper configurations shown in supplied media; regional kit to be confirmed |
Source: manufacturer product page, checked 19 November 2026. View the manufacturer page
The price is the beginning of the calculation.
Include your project frequency, preparation, cleanup, wear parts and service arrangements.
What you pay
Request one regional quote with the machine, exact kit, delivery, tax and any duties itemized.
What you maintain
Know the cleaning requirements and the correct filters, seals, tips and wear parts for the model.
Who helps
Confirm the written warranty, return terms, service location and freight responsibilities before ordering.
Support for this model
Compare the alternatives
Compare the role, the published figures and the kit. Similar maximum flow does not establish identical durability, finish or support.
| Model | Proposed role | Maximum flow | Maximum tip | Pressure | Motor and power |
|---|---|---|---|---|---|
| HVBAN EP270 | Professional painting | 2.7 L/min | 0.025 in | 23 MPa / 3,336 psi | Brushless DC, 1,500 W (product page) |
| HVBAN A3 | Renovation and property work | 2.3 L/min | 0.023 in | 23 MPa / 3,336 psi | Brushless DC, 1,300 W |
| HVBAN LF19 | Home projects | 1.9 L/min | 0.019 in (product page) | 19 MPa / 2,756 psi | Brushless DC, 800 W |
Real owner experience
Our first project stories belong here.
We will publish real customer experiences with permission. No invented ratings or testimonials.
Questions about the EP270
Can I order the EP270 now?
Not yet. The price is set and shown on this page; orders open once the North American configuration and the warranty and returns terms are confirmed. Request a written quote now and we will confirm your kit and order date.
Which paints and coatings can it spray?
Start from the coating manufacturer’s recommended tip size and compare it with the machine’s published maximum tip. We will publish an approved coating guide for each regional model before sale.
Is it right for a first-time sprayer?
An airless sprayer rewards preparation: masking, a practice pass on cardboard and a proper cleanup. If your project is a single small touch-up, a roller may be the better tool. Tell us the project and we will say so.
What about voltage in Canada and the United States?
This is the North American version: 120 V, 60 Hz, with a standard North American plug.




