Skip to content

Canada site · www.airlesspaintsprayer.ca · CAD

In the USA? www.airlesspaintsprayerusa.com →

Region and language CAD
Region and language

Country/region and currency

0 items in cart

Cart

Your cart is empty.

Spraying interior walls and ceilings

· Airless Sprayer

A crew painting an apartment during a turnover

Spraying interiors is fastest when the room is empty: new builds, renovations, rental turnovers and basements. In a furnished room, the masking usually costs more time than the spraying saves.

Masking

  • Cover floors with drop cloths or paper, taped at the edges.
  • Mask windows, doors, outlets and fixtures. Pre-taped plastic speeds this up.
  • Turn off HVAC so it does not pull mist through the house.
  • Ventilate and wear a respirator suited to the coating.

Order of work

  1. Ceiling first, then walls, then trim if you are spraying it.
  2. Cut in corners and edges with a quick vertical pass, then fill the field with overlapping passes, about half a fan width each.
  3. Keep a wet edge and work wall by wall.

Spray and back-roll

Many painters spray and then back-roll walls while the paint is wet. It evens the texture and hides lap marks. A two-person crew (one spraying, one rolling) is the classic production setup.

Tip and pressure

Interior latex usually runs on about a 0.015 to 0.019 in tip; heavy primers higher. Use the lowest pressure that gives a clean fan with no heavy edges. See choosing a tip.

Which machine

Whole homes and turnovers week after week: the EP270. Renovations and rentals: the A3. A basement or a couple of empty rooms: the LF19.

Photo: illustrative scene, not a customer photograph.