Skip to content

Canada site · www.airlesspaintsprayer.ca · CAD

In the USA? www.airlesspaintsprayerusa.com →

Region and language CAD
Region and language

Country/region and currency

0 items in cart

Cart

Your cart is empty.

Buying guide · 50 questions

50 Questions Before You Buy an Airless Sprayer

The questions contractors and homeowners ask most before buying an airless paint sprayer online, answered plainly. Where something is still being confirmed with HVBAN, we say so.

Thinking about it

Is a sprayer right for me?

What is an airless paint sprayer? Everyone

A pump pushes paint at high pressure through a tiny tip, which breaks it into a fine, even fan. There is no compressor and no air hose. It moves far more paint than a roller, which is why painters use one for walls, ceilings, fences, decks and exteriors.

Is a sprayer worth it for one room? Homeowners

Often not. Masking and cleanup take time, so for one small bedroom a good roller is usually quicker overall. A sprayer pays off on several rooms, ceilings, a whole fence, a deck or an exterior.

Spray, roll or rent? →

Is buying cheaper than renting? Homeowners

Rental shops charge by the day, and you return the machine cleaned. If you paint more than a few days a year, owning usually costs less and lets you work on your own schedule.

Spray, roll or rent? →

How much faster is spraying than rolling? Everyone

On large surfaces, spraying is several times faster than rolling once the masking is done. Ceilings, fences, siding and empty rooms gain the most; small rooms full of furniture gain the least.

Is it hard to learn? Homeowners

The motion is simple: hold the gun 25 to 30 cm (10 to 12 in) from the surface, keep it square, move at a steady pace and overlap each pass by half. Practise on cardboard for five minutes before you start.

Getting started →

Will the finish look better than a roller? Homeowners

A sprayed coat is even, with no roller texture. That shows most on doors, trim, cabinets and smooth walls. Many painters back-roll walls straight after spraying for an even sheen.

Spraying walls and ceilings →

Will an electric airless keep up with daily contractor work? Contractors

Match the machine to the workload. The EP270 (2.7 L/min, 0.025 in maximum tip) is our contractor model for recurring small and medium jobs; the A3 suits renovation and property-maintenance crews. Tell us your weekly volume before you buy: the rated duty volume is still being confirmed with HVBAN.

See the EP270 →

Comparing

Which HVBAN machine?

Which model is right for me? Everyone

LF19: occasional home projects such as a fence, a deck or a few rooms; compact, with hopper or suction-tube feed. A3: serious renovations, rental turnovers and smaller painting businesses. EP270: recurring paid painting work.

Which sprayer is right for me? →

What is the difference between the three models? Everyone

Manufacturer figures. LF19: 1.9 L/min, 0.019 in maximum tip, 19 MPa (2,756 psi), 800 W. A3: 2.3 L/min, 0.023 in, 23 MPa (3,336 psi), 1,300 W. EP270: 2.7 L/min, 0.025 in, 23 MPa (3,336 psi), 1,500 W. All three are brushless electric machines.

Compare all three →

How do HVBAN prices compare with Graco? Everyone

Each HVBAN machine is priced at about half the dealer-listed price of the closest Graco model, checked in November 2026: the A3 against the 390 PC, the EP270 against the Ultra 490 XT and the LF19 against the Magnum ProX19. Graco has a long track record and service centres, and every model page shows the comparison with its source.

See the side-by-side →

Why is it so much cheaper? Everyone

You buy from HVBAN's own store, not through a distributor, a dealer and a retailer, each adding margin. The price is on the page, and shipping is a flat $49.

What do maximum flow and maximum tip mean? Contractors

Maximum flow is the most paint the pump can move in a minute. Maximum tip is the largest tip orifice it can supply on one gun. A larger tip handles thicker coatings and lays paint faster. Both are upper limits, not what you will run all day.

Can it run two guns? Contractors

Two-gun use is not confirmed for these models. Plan on one gun per machine.

Checking the job

Will it do my job?

Which paints and coatings can I spray? Everyone

Water-based latex and acrylic paints, primers, stains and many enamels, within the machine's maximum tip. The can's application section names the tip size. Heavy coatings such as elastomeric or block filler need large tips: ask us before you buy.

Choosing a tip →

Do I need to thin latex paint? Homeowners

Usually not, if you use the right tip. Read the can first. Thick paint usually wants a larger tip rather than thinning, up to your machine's maximum. Thinning guidance for each model is being confirmed with HVBAN.

Which tip size should I use? Everyone

A tip code such as 517 means a 10 to 12 in fan (5 x 2) and a 0.017 in orifice. As a rough guide: stains 0.013 to 0.015, interior latex 0.015 to 0.019, exterior and heavier paint 0.019 to 0.021, primers and thick coatings up to the machine's maximum. Never go past your machine's maximum tip.

Tip size guide →

Can I spray a fence or deck? Homeowners

Yes. Stains go through small tips, so all three models suit fences and decks. Cover plants, cars and anything nearby, and pick a calm day: wind carries mist further than you expect.

Spraying a fence or deck →

Can I spray ceilings? Everyone

Yes, and ceilings are where a sprayer saves the most time. Cover floors and walls, wear eye protection and a respirator, and spray in steady overlapping passes.

Walls and ceilings →

Can it spray solvent-based coatings, lacquer or oil? Contractors

Solvent compatibility of the seals and packings is being confirmed with HVBAN. Until it is, plan on water-based coatings and ask us about a specific product.

How do I keep overspray off the car, the floor and the neighbours? Homeowners

Use the lowest pressure that gives a clean fan, the right tip and a 25 to 30 cm distance. Outdoors, spray only when it is calm. Mask and cover everything within a few metres. No airless sprayer is overspray-free.

Is the hose long enough for a two-storey house? Everyone

The included hose length and the maximum hose length for each model are being confirmed. A longer hose costs some pressure at the gun. Ask us before you buy if you need to reach a second storey from the ground.

Does the pressure hold steady? Contractors

All three machines use brushless electric motors with adjustable pressure. Pressure-stability data has not been published, so ask us for a demonstration video of your model.

Checking the job

Power and safety

Will it plug into a normal outlet? Everyone

Yes. Every machine sold here is the North American version: 120 V, 60 Hz, with a standard North American plug.

Can it share a 15 A circuit with other tools? Contractors

Give it its own 15 A circuit, especially the EP270, and do not run saws or heaters on the same circuit. Nameplate amps for each model are being confirmed.

Power on the job site →

What size generator do I need? Contractors

Choose a generator with comfortable headroom over the motor rating to cover start-up, and run nothing else on it. The minimum generator size for each model is being confirmed.

Power on the job site →

What extension cord should I use? Everyone

A heavy 12-gauge cord, as short as you can manage. A longer paint hose is better than a longer cord.

Cords and circuits →

Is it certified for use in Canada and the USA? Everyone

Yes. The machines sold here are certified for North American use. Ask us for the certificate for your model.

How dangerous is an airless sprayer? Everyone

The pressure is high enough to inject paint under the skin, which is a medical emergency. Never point the gun at anyone, keep the tip guard on, use the trigger lock and relieve the pressure before cleaning or changing a tip.

Airless safety →

How loud is it? Homeowners

A noise rating has not been published yet. Wear ear protection for long sessions, and ask us if noise matters where you work.

Deciding who to trust

Who are you, and can I trust you?

Who is HVBAN? Everyone

Fuzhou HVBAN Mechanical Equipment Co., Ltd. designs and builds airless paint sprayers in Fuzhou, China. HVBAN reports a 50,000 m² factory, more than 300 staff, more than 40 patents and exports to over 140 countries and regions.

About HVBAN →

Who am I actually buying from? Everyone

HVBAN's official store for Canada and the USA. It is run from Canada, with Tim Peters as project lead, and the machines are stocked in Canada.

About us →

Can I talk to a real person before I buy? Everyone

Yes. Send us your project, coating and timing, and a person answers in English or Simplified Chinese.

Talk to us →

Where are the reviews? Everyone

HVBAN is new to North America, so there are no reviews here yet, and we will not invent any. Reviews from verified buyers will appear with their dates and models.

Why buy a brand I don't know? Everyone

About half the price of the comparable Graco, published specifications, a 1-year limited warranty, 30-day returns and a large established maker. What Graco still has is a dealer and service-centre network; we say so on every comparison.

What is confirmed →

Buying

Buying, paying and shipping

How much is shipping? Everyone

A flat $49 anywhere in Canada (in CAD) or the USA (in USD).

Where does it ship from, and how will I track it? Everyone

Orders ship from Canada. You get an order confirmation by email, and a tracking link when it ships. Delivery times are being confirmed.

Will I pay duties or brokerage at the door? Everyone

No. Our prices include duties and import fees.

Will I pay tax? Everyone

Any tax that applies is shown at checkout before you pay.

How can I pay? Everyone

Credit and debit cards, Apple Pay, Google Pay and Shop Pay, through Shopify's checkout.

Is checkout secure? Everyone

Yes. Payment runs through Shopify's encrypted checkout, and we never see your full card number.

Can I get a written quote or buy several machines for my crew? Contractors

Yes. Request a written quote with the models and quantities, and ask about pricing for several machines.

Request a quote →

Can I return it? Everyone

Yes, within 30 days of delivery, unused and in its original packaging. You pay return shipping unless the machine is faulty or arrived damaged.

Refund policy →

What if it arrives damaged? Everyone

Tell us as soon as you can, with your order number and photos or a short video, and we arrange the fix or the return.

What comes in the box? Everyone

The machine with a gun, a hose and a tip. The exact items for each configuration are being confirmed, so ask us before you buy if you need a specific hose length or tip.

Owning it

Owning it: warranty, parts, cleanup and storage

What is the warranty? Everyone

A 1-year limited warranty against defects in materials and workmanship, from the day of delivery. Wear parts such as tips, filters and packings are excluded. Ask us about paid contractor use before you buy.

Read the warranty →

What happens if it stops mid-job? Contractors

Most stoppages are a clogged inlet strainer, gun filter or tip, not a breakdown. If it is a real fault, send us the model, serial number and a short video: we diagnose it with you and ship the part. There is no repair-centre network yet.

What happens if it breaks →

Can I buy parts such as packings, tips and filters? Contractors

Yes. Send us the model and serial number and the part you need. A published parts list with part numbers and prices is being built.

Ask for a part →

Do Graco or Titan tips fit? Everyone

Compatibility with Graco and Titan tips and guards is not confirmed yet. Plan on HVBAN tips and guards until it is.

How long does cleanup take? Everyone

With water-based paint, plan on 15 to 30 minutes: run clean water through the pump, hose and gun until it comes out clear, then clean the filters and the tip.

Cleanup guide →

How do I store it overnight or over winter? Everyone

Overnight between coats: relieve the pressure and keep the tip in water. For longer: flush it completely, fill it with pump protector and store it above freezing.

Storage guide →

Ready when you are.

Flat $49 shipping anywhere in Canada or the USA. 30-day returns. A 1-year limited warranty on every machine.

  • For contractors and painting crews

    EP270

    $1,599.00

    Plus flat $49 shipping anywhere in Canada or the USA. Duties included.

  • For renovators, landlords and serious DIY

    A3

    $869.00

    Plus flat $49 shipping anywhere in Canada or the USA. Duties included.

  • For homeowners and weekend projects

    LF19

    $549.00

    Plus flat $49 shipping anywhere in Canada or the USA. Duties included.

Still have a question? Talk to us